Designation to be followed by the design and material codes, indicating one of the four variants available for each dimension: HMS5 RG without auxiliary lip, nitrile rubber HMS5 V without auxiliary lip, fluoro rubber HMSA10 RG with auxiliary lip, nitrile rubber HMSA10 V with auxiliary lip, fluoro rubber
closed housing, can be relubricated. - LQCR version using LBCR bearing - LQCD version using LBCD bearing, self-aligning
open housing, can be relubricated. - LQCF version with LBCF bearing, self-aligning
open housing, can be relubricated. - LTCF version using LBCF bearing, self-aligning
- closed and open design
closed housing, can be relubricated - LTCD version using LBCD bearing, self-aligning
Upon request LUCE/LUCS bearing units are available in stainless steel execution. Designation: e.g. LUCE/LUCS 20-2LS/HV6 LUCE linear bearing units can also be fitted with rigid linear ball bearings of type LBCR A. Designation: e.g. LUCS 20-2LS. For suitable shaft blocks LSCS/LSNS for these bearing units
Upon request these bearings are available in stainless steel execution. Designation: e.g. LBHT 20 A-2LS/HV6 Linear ball bearings with one seal are available on request.
slotted housing, can be relubricated, clearance adjustable
The outside diameter tolerance of the linear plain bearings is such that no additional axial fixation is required when the bearings are fitted into a bore with a tolerance of J7 or J6.
with closed housing and LBBR linear ball bearing
For suitable shaft blocks for these bearing units, designation LSHS, see page 45. Linear bearing units of the LUHR design are also available fitted with LPBR linear plain bearings. Designations: e. g. LUHR 20 PB.
Upon request these bearings are available in stainless steel execution. Designation: e.g. LBCR 20 A-2LS/HV6 Linear ball bearings with one seal are available on request.
self aligning and closed design
self-aligning and open design
open housing, can be relubricated, clearance adjustable - LUNF version using LBCF bearing, self-aligning
with closed housing and LBBR linear ball bearings
SKF Linear ball bearings LBBR "The outside diameter tolerance of the linear ball bearings is such that no additional axial fixation is required when the bearings are fitted into a bore with a tolerance of J7 or J6."
Specification
Did not receive yet?
Thank You for your valuable time. We have received your details and will get back to you shortly.
For immediate response, call this customer.