KHS BEARINGS Supplier,Distributor in Mumbai,KHS BEARINGS Exporter

(10064)

KHS FLAT ROLLER CAGES

Price: 1000.00 - 10000.00 INR

KHS Flat needle roller cages consists of FF and FF..ZW series which are plastic ,with dovetail notches on the ends which enable any number of components to be fixed end to end .The needle rollers are grouped in a diameter tolerance of 0 to -2 microns ,and are individually guided and retained.KHS flat cages prevent “slip-stick” and ensure smooth trouble free running running for all types of flat guidways.FF series are single row flat cage and FF..ZW are double row flat cage. The double row are connected by a flexible web which permits the two rows of needle rollers to be bent to any required angle relative to one another so that the whole can be used as a inverted vee-cage. (series includes FF,FF..ZW..etc.)

Send Inquiry

Ask A Question

(10065)

KHS DUAL SHAFT GUIDES

Price: 1000.00 - 10000.00 INR

KHS INNOVATION & ENGINEERING LLP Dual Shaft Guides are best suited for linear motion applications which demand Corrosion Resistance and antirust properties along with high speeds and very low noise . The material of Linear Block and Shaft support is of aluminum alloy with superior surface finish and anodizing. KHS INNOVATION & ENGINEERING LLP ,TPS Dual Guides, adopting highcarbon chromium bearing steel to the friction part ,guarantees long term life span because it obtains over 58 HRC (Hardness of Rockwell) by high-frequency heat treatment, and precision grinding and hardened chromed which not only has pleasing appearance but provides excellent anti-rust properties. The Running precision is less than ±0.02 with the adoption of double row bearings.

Send Inquiry

Ask A Question

(10066)

KHS PILLOW BLOCK BEARINGS

Price: 1000.00 - 10000.00 INR

PILLOW BLOCK BEARINGS SERIES INCLUDES UCP,UCT,UCF,UCFL,etc

Send Inquiry

Ask A Question

(10062)

KHS PERMAGLIDE DRY BLUSH

Price: 1000.00 - 10000.00 INR

P10 is a leaded, robust sliding material with maximum tribological performance. It is designed for maintenance-free, dry-running applications, but can also be employed in systems with liquid lubrication. The use of grease as a lubricant with P10 is only possible to a limited extent, and is not recommended.

Send Inquiry

Ask A Question

(10060)

KHS TRACK ROLLER BEARINGS

Price: 1000.00 - 10000.00 INR

KHS Cylindrical roller bearings are full complement cylindrical single row and multi-row cylindrical roller bearings and are designed to take heavy loads. As locating and semi-locating bearings, they can take axial as well as heavy radial loads.

Send Inquiry

Ask A Question

(10059)

KHS NEEDLE ROLLER AND RAGE ASSEMBLIES

Price: 1000.00 - 10000.00 INR

KHS Needle roller and cage assembly, series K, is a self-retaining roller bearing component consisting of a complement of needle rollers held and guided in place by a cage. With no inner or outer ring, the low cross section provides maximum load-carrying capability within the smallest envelope.

Send Inquiry

Ask A Question

(10061)

KHS RADIAL SPHERICAL PLAIN BEARINGS

Price: 1000.00 - 10000.00 INR

KHS specializes in all types of spherical plain bearings including maintenance free type, (Various series includes GE., ES, ES2RS, GE FW, GE.,UK, GE.GS, GE.LO, GE.HO, etc.) Because of its competitive pricing and consistent quality KHS has become one of the leading brands for spherical plain bearings in India, and also has found acceptance in all major OEM’s.

Send Inquiry

Ask A Question

(10063)

KHS ONE WAY CLUTCH

Price: 1000.00 - 10000.00 INR

Type CSK is a sprag type free wheel integrated in to a 62 series Ball Bearing, (except sizes 8 and 40) it is bearing supported, delivered grease lubricated and protected against dust of more than 0.3 mm the use of additional “nylos” type seals is recomended especially when the working temperature exceeds 50o C. Oil bath lubrication is also possible. All the CSK versions are equipped with “formchromed” sprags. This process increases several times the over running life time. (Series includes CSK, CSK-K/CSK-KK, NSS, NFS, B200 Series and BWC/DC Rachet cages

Send Inquiry

Ask A Question

(10055)

KHS Stud And Yoke Type Track Roller Bearings

Price: 1000.00 - 10000.00 INR

KHS Stud and Yoke type track roller bearings consist of a thick-walled heavy-duty outer ring that is designed in arc shape to avoid edge stress. They can be used as pressure rollers, eccentric rollers or rocker arm rollers as well as for simple linear guidance.

Send Inquiry

Ask A Question

(10054)

KHS DRAWN CUP NEEDLE ROLLER CLUTCHES

Price: 1000.00 - 10000.00 INR

KHS Drawn cup needle roller clutches have a very small radial section height and makes optimum use of the available space allowing compact designs to be achieved. These clutches are suitable for transmitting high torque and are normally used for indexing ,back-stopping and as overrunning clutches.

Send Inquiry

Ask A Question

(10057)

KHS Linear Motion Bearings

Price: 1000.00 - 10000.00 INR

KHS Rod end bearings are compact, self-aligning spherical bushings that can support a large radial load and a bi-directional axial load at the same time.

Send Inquiry

Ask A Question

(10058)

KHS Linear Motion Shaft With Support

Price: 1000.00 - 10000.00 INR

KHS INNOVATION & ENGINEERING LLP Dual Shaft Guides are best suited for linear motion applications which demand Corrosion Resistance and antirust properties along with high speeds and very low noise . The material of Linear Block and Shaft support is of aluminum alloy with superior surface finish and anodizing.

Send Inquiry

Ask A Question

(10056)

KHS Rod End Bearings

Price: 1000.00 - 10000.00 INR

KHS Rod end bearings are compact, self-aligning spherical bushings that can support a large radial load and a bi-directional axial load at the same time. They have either a female thread in the body or a male thread on the body, and they can be easily assembled onto machines.

Send Inquiry

Ask A Question

(10053)

KHS THRUST NEEDLE ROLLER BEARING

Price: 1000.00 - 10000.00 INR

KHS Thrust needle roller bearings are composed of rollers, thrust cage & washer. The rollers can be needle rollers or cylindrical rollers and are equally spaced by means of a cage whose web section separates the rollers and provides guidance to keep them tracking in an orbital path.

Send Inquiry

Ask A Question

(10052)

MACHINED TYPE NEEDLE ROLLER BEARING

Price: 1000.00 - 10000.00 INR

KHS Machined type needle roller bearings are roller bearings which have a high load carrying capacity with very small section height and are available with or without inner ring.

Send Inquiry

Ask A Question

(10051)

DRAWN CUP NEEDLE ROLLER BEARING

Price: 1000.00 - 10000.00 INR

KHS Drawn cup needle roller bearings consist of a drawn cup thin-walled, cold-formed outer ring, a group of needle rollers and cage assembly which together form a bearing unit. The low cross section provides maximum load-carrying capability with a minimum of space required and can be easily installed with a press fit in the housing and normally require no further axial fixing.

Send Inquiry

Ask A Question

(00001)

KHS DAWN CUP NEEDLE ROLLER BEARING

Price: 1000.00 - 10000.00 INR

KHS DRAWN CUP NEEDLE ROLLER BEARING

Send Inquiry

Ask A Question