Pneumatic Pressure Switch
Model: MP25
Pressure range Compound -100.0~100 kPa, Positive 0~1MPa, Vacuum 0~101.3kPa.
Features
Specifications :
Port size | F1:PT 1/8, F2:NPT 1/8, F3:G 1/8 |
Rated pressure range | Compound: 100.0~100.0 kPa Vacuum: 0.0 ~ 101.3 kPa Positive: 0.00 ~ 1.00 MPa |
Operating / Setting pressure range | Compound: 100.0~100.0 kPa Vacuum: 10.0 ~ 101.3 kPa Positive: 0.10 ~ 1.00 MPa |
Medium | Air, Non-corrosive gases ,incombustible gases |
Proof pressure | 3 times of rated pressure range (Compound, vacuum)1.5 times of rated pressure range (Positive) |
Power supply voltage | 12 to 24VDC 10%, Ripple (P-P) 10% or less |
Response time | 2.5ms (chattering-proof function: 24ms, 192ms and 768ms selections) |
Switch output | NPN or PNP open collector 2 outputs Max. load current: 80mA Max. supply voltage: 30VDC Residual voltage:1V (load current 80mA ) |
Repeatability (Switch output) | 0.2% F.S. 1 digit |
Current consumption | 55mA |
Output short circuit protection | Yes |
7 segment LCD display | 3 1/2 digit LED display (Sampling rate: 5 times/1sec.) |
Indicator accuracy | 2% F.S. 1 digit (ambient temperature: 25 3 ) |
Indicator | Green LED (OUT1) Red LED (OUT2) |
Enclosure | IP65 |
Ambient temp. Range | Operation: 0 ~ 50 ,storage:-20 ~ 60 ( No condensation or freezing) |
Ambient humidity range | Operation/Storage: 35 ~ 85% RH ( No condensation) |
Withstand voltage | 1000VAC in 1-min (between case and lead wire) |
Insulation resistance | 50Mohm min. (at 500VDC M, between case and lead wire) |
Vibration | Total amplitude 1.5mm,10Hz-55Hz-10Hz scan for 1 minute, two hours each direction of X,Y and Z |
Shock | 980m/s2(100G),3 times each in direction of X,Y and Z |
Temperature characteristic | 2% F.S. of detected pressure (25 ) at temp. Range of 0~50 |
Lead wire | Oil-resistance cable(0.15mm2) |
Weight | Appro 105g(with 2-meter lead wire), Appro 71g(with meter connector) |
Thank You!
Thank You for your valuable time. We have received your details and will get back to you shortly.