Pneumatic Pressure Switch Model: MP10

Get a Price/Quote

MOQ : 1 Piece

Pneumatic Pressure Switch Model: MP10 Specification

Accuracy
High repeatability, 1%

Coating
Powder Coated Body

Thread Type
BSP (British Standard Pipe)

Load Capacity
Max. 3A @ 250V AC

Machine Type
Compatible with pneumatic systems

Shape
Rectangular

Size
1/4-inch BSP

Method
Mechanical, Diaphragm operated

Weight
Approx. 200 g

Type
Pressure Switch

Material
Die Cast Aluminum Body, Brass Connection

Tolerance
1% of set point

Surface
Matt Finished body

Use
Detecting and monitoring pneumatic system pressure

Application
Industrial automation, pneumatic equipment, compressor systems

Usage & Applications
Controlling pneumatic circuit through pressure feedback

Set Point Adjustment
External Knob

Pressure Range
1 to 10 Bar

Contact Type
SPDT (Single Pole Double Throw)

Medium
Air or neutral gases

Electrical Connection
Screw Terminal

Mounting
Panel/Surface Mount

Operating Temperature
-10C to +60C

Enclosure Protection
IP65

About Pneumatic Pressure Switch Model: MP10

Pneumatic Pressure Switch

Model: MP10

Simple installation, plug-in port or thread-in fitting.
Compact size: 261010.4 mm.
Setting pressure range:Vacuum (0~ 101.3 kPa), Positive (0~0.6 MPa)
Low cost.

Features

Simple installation, plug-in port or thread-in fitting.
Compact size: 261010.4 mm.
Setting pressure range:Vacuum (0~ 101.3 kPa), Positive (0~0.6 MPa)

Specifications :

Dimensions	261010.4 mm
Operating / Setting pressure range	Vacuum : 0 ~ 101.3 kPa, Positive : 0 ~ 0.6 MPa
Medium	Air, Non-corrosive / Non-flammable gas
Proof pressure	Vacuum : 0.6 MPa, Positive : 1.5 MPa
Response time	Approx. 1ms
Current consumption	10mA max.
Sensor type	NPN or PNP
Output short circuit protection	Yes
Setting method	Adjusting by VR
Indicator	Red LED turns ON
Enclosure	IP 40
Ambient temp. Range	Operation: 0 ~ 60, storage: 20 ~70 ( No condensation or freezing)
Ambient humidity range	Operation / Storage: 35~85% RH (No condensation)
Vibration	Total amplitude 1.5mm, 10Hz-55Hz-10Hz scan for 1 minute, two hours each direction of X, Y and Y
Shock	980m/s2 (100G),3 times each in direction of X,Y and Z
Piping method	Push-in tube or thread-in
Lead wire	Oil-resistance cable, 3 wires(0.18mm2), 2.6mm
Weight	Approx. 50 g (with 3-meter lead wire)

Versatile Pressure Monitoring Solution

The MP10 model excels at detecting and controlling pneumatic system pressure between 1 and 10 bar. Its diaphragm-operated mechanical technology ensures accurate and repeatable switching, making it suitable for compressor systems, industrial automation, and pneumatic equipment. The SPDT contact gives users flexibility in electrical control.

Robust Construction and Simple Installation

Built with a die-cast aluminum body and brass connections, the MP10 offers excellent durability. The powder-coated, matt-finished surface resists corrosion, while panel or surface mounting and screw terminals ensure straightforward installation. The external knob allows set-point adjustments without dismantling the enclosure.

Reliable Performance in Challenging Conditions

Rated IP65, the MP10 resists dust and water, making it reliable for use in harsh industrial environments. It accommodates operating temperatures from -10C to +60C, ensuring consistent performance and high repeatability (1%) across a range of conditions.

FAQs of Pneumatic Pressure Switch Model: MP10:

Q: How do I adjust the pressure set point on the MP10 Pressure Switch?

A: The MP10 features an external adjustment knob, allowing you to easily set or change the pressure set point without needing to open the enclosure. This user-friendly feature simplifies calibration and routine maintenance.

Q: What benefits does the SPDT contact provide in this pressure switch?

A: The Single Pole Double Throw (SPDT) contact type offers versatile control by allowing the switch to control two different circuits or provide both normally open and normally closed outputs. This flexibility makes the switch suitable for various control schemes in automation and safety applications.

Q: Where can the MP10 Pneumatic Pressure Switch be installed?

A: The MP10 is designed for panel or surface mounting, providing adaptability for integration in control panels, compressor systems, pneumatic manifolds, or machinery housing. Its compact, rectangular design and standard 1/4-inch BSP thread ensure compatibility with most industrial pneumatic setups.

Q: What is the process of wiring the MP10 Pressure Switch?

A: The MP10 uses screw terminals for secure and dependable electrical connections. Simply connect the incoming wires to the labeled screw terminals based on your circuit requirements. Refer to the supplied wiring diagram for correct configuration using the SPDT contact format.

Q: What applications is the MP10 Pressure Switch ideal for?

A: This model is engineered for industrial automation, pneumatic equipment control, and compressor monitoring. Its high accuracy (1%), durability, and ability to operate with air or neutral gases make it ideal for demanding pneumatic pressure detection and control tasks.

Q: What are the main advantages of choosing the MP10 Pressure Switch for pneumatic systems?

A: The MP10 offers high repeatability, robust weather protection (IP65), user-friendly adjustment, and durable materials. These features deliver reliable performance, reduced maintenance, and enhanced safety for controlling and protecting pneumatic circuits in industrial environments.

Tell us about your requirement